Spindle Testing Device STD

Hardened prisms are made to support the spindles precisely. A sophisticated clamping system allows fast changing of the spindles on serial measurements. Thanks to the stable and the homogenous construction of the device, high precision measurements can be realized. The measurement results can be read out of the digital display, and/or be transmitted and evaluated in the software P-soft.

Measurement procedure:

  • First insert of the appropriate contact-probe
  • Insert the spindle into the prisms
  • Touching the first position with the contact-probe
  • Set the display to zero / transmit measurement value to the software P-soft
  • Lifting up the contact-probe, measuring the next measuring position
  • Read the measurement value from the display or insert the value into the software P-soft
  • Evaluating the results


Advantages:

Thanks to the contactless and friction free vacuum air bearing technology the system is remarkably stable and free from wear out. The low weight and slip resistance of the slide allow an extremely precise centering within the thread. This guarantees highest precision and repeatability. The device has been developed especially for workshop-floor use and is therefore protected appropriately against pollution. The handling is absolutely easy and needs no certain knowledge.

Customer values:

  • Easy and simple handling
  • Efficient and reliable measurement
  • High precision and repeatability
  • Cost efficient solution for quality control
  • Efficient series measurement
  • Option: analysis software P-soft

 

Factsheet Spindle Testing Device STD

Technical Data

Type Dimensions (L×W×H) Workpiece Ø (in prisms) Measuring length Travel vertical Weight Required compressed air Air consumption Electrical connection Ambient temperature Measurement reading System accuracy Repeatability Resolution display unit Parallelism prisms to the slide guideway
STD-1000 1530 × 450 × 525 mm Ø 6–30 mm 1000 mm 80 mm 356 kg 6 bar 40 l/min 100-240 VAC @ 50/60 Hz 15–25 °C static (manually) 2.0 μm + 2.0 × 10-6 L 2.0 µm 0.1 µm 5.0 µm

The system accuracy applies to a spindle lead angle of max. 10°.

The accuracy values apply to 20 °C and stable temperature conditions (ΔT ≤ 0.2K / 24h).

Technical data are subject to change. The data presented are from already implemented test devices. For customized solutions in various dimensions we are your specialist. Please contact us: Contact.